Jet printing integrity, Mark safety----Win the future
|Place of Origin:||Shanghai|
|Model Number:||Automatic Filling Machine|
|Minimum Order Quantity:||Negotiation|
|Packaging Details:||fumigated wooden packaging|
|Delivery Time:||14 work days|
|Payment Terms:||L/C, T/T|
|Supply Ability:||10 units per month|
|Type:||Fully Automatic||Speed:||4000 Bottles / Hour|
|Application:||Fresh Juice Beverage|
Fully Automatic Filling Machine For Fresh Juice Beverage 4000 Bottles / Hour 500 ML
|1||Roller Selection Machine||GXJ-2||One|
|2||surfing type fruit washing machine||GXJ-2||One|
|3||crushing juicer unit||PZJ-2.5||One|
|4||temporary storage tank||500L||One|
Equipment structure and working principle: The equipment enters the machine from the feeding hopper by the conveying roller, the frame, the transmission part, the inlet and outlet hopper, etc.
Under the action of gravity, the raw material is laid flat on the surface of the roller. Since the roller is in contact with the non-metallic track below, the roller rotates in the same direction while rotating (horizontal movement). After continuously rotating and moving to the discharge direction to the next process, the operator can detect the unqualified fruits and vegetables to maintain the quality of the product;
surfing type fruit washing machine
The device is suitable for cleaning raw materials of fruits and vegetables;
Working principle: The machine consists of several parts such as rack, water tank, fan (pump), hoist, circulating flushing pump, transmission part, etc.
Due to the presence of wind (pressure) in the water, the fruits and vegetables are vigorously tumbled and stirred in the water. The washing water is pressurized by the circulating flushing pump to the inlet nozzle, and the direction of the nozzle is adjustable, and the high-pressure water sprayed by the nozzle can be Rinse again and drift toward the exit direction. The exit is equipped with a hoist, the speed of the hoist is adjustable (adjust the speed of the hoist to the required production capacity), and the washed fruits and vegetables are sent to the next process;
crushing juicer unit
Automatically complete the crushing, juicing and slagging processes;
This machine is mainly suitable for the crushing and juicing of various berries, pome fruits and various vegetables, such as: tomatoes, pineapples, apples, oranges, peppers, spinach,
Ginger and other vegetable crushing;
Structure: The equipment is mainly composed of the crushing device in the feeding hopper, the front support seat, the spiral, the filter net, the juice holder, the rear support, and the slag discharge tank.
The composition of the parts, the left end of the spiral main shaft is supported in the flow bearing housing, the right end is supported in the hand shaft bearing seat, and the motor is driven by a pair of V-belt drive screws;
Working principle: The main component of the equipment is the installation of the crushing device on the feeding hopper. There is a flying knife on the rotor. The flying knife is fixed around its own axis.
The bottom knife gap rotates, so that the fruit and vegetable are broken into 3-10 mm, directly into the spiral juice extraction system. The main component of the spiral juice is made up of a spiral. The spiral diameter of the spiral gradually increases along the direction of the slag exit and the pitch gradually decreases. When the material is spirally advanced, the volume of the spiral cavity is reduced to form a press of the material. The direction of rotation of the spiral main shaft is viewed from the feed hopper toward the slag groove in a clockwise direction. The raw material is added to the feed hopper, pressed under the advancement of the spiral, and the pressed juice flows through the filter into the bottom of the juicer, and the waste is discharged through the annular gap formed between the spiral and the tapered portion of the pressure regulation. The movement of the pressure regulating head in the axial direction can adjust the size of the gap. For clockwise (when turning the handwheel bearing seat from the tapping groove of the equipment to the feeding hopper end, the pressure regulating head is turned to the left, the gap is reduced, and the gap is enlarged.) The size of the gap is changed, that is, the slag is adjusted. The resistance can change the slag rate, but if the gap is too small, under strong extrusion, some of the slag particles will be extruded through the filter together with the juice. Although the juice is increased, the quality of the juice is relatively decreased. The size should be determined according to the specific process requirements of the user;
temporary storage tank
The tank is a square or round single-layer, vertical open sanitary clean container equipment, which is often used in pharmaceutical, bioengineering, food, beverage and other industries.
The intermediate temporary buffering device is used, and the jacket, heat preservation and stirring structure can be added according to the process requirements;
It is used to transport milk juice, soy milk, juice drinks and similar liquid foods. It has simple structure, stable operation, sufficient lift, safe and reliable.
Beautiful appearance, easy to use, etc.;
Structural composition: consists of high-speed motor, stainless steel pump body, steel pipe tripod, etc.
The pump overflow part is made of stainless steel.
Suitable for screening and liquid filtration of powdered and granulated materials in various industries;
Working principle: This machine uses the heavy hammer (unbalanced weight) installed on the upper and lower sides of the motor shaft to convert the rotary motion of the motor into horizontal and vertical.
The inclined three-dimensional movement, and then the movement is transmitted to the screen surface, so that the material is expanded and involute on the screen surface. The vibrating screen has the advantages of long track of material running and high utilization rate of screen surface. Adjusting the phase angle of the upper and lower ends of the hammer can change the movement track of the material on the screen surface. The material can be finely sieved and probability sieved. Graded.
The contact part of the equipment with the material is made of stainless steel and food grade rubber, and the seal is food grade rubber.
Yinma team building:
Shanghai Yinma Logo Co., Ltd. (formerly: Shanghai Yinma Logo Technology Co., Ltd.), since its establishment, has continuously attracted talents through equity incentives and other policies. At present, the company has more than 100 employees, including more than 20 management personnel and 16 R&D teams. At the same time, it cooperates with Donghua University and Shanghai University, and employs university professors as technical consultants.
Our team is led by CEO Baodong Shen and Technical Director Hua Li and made up of Shanghai, Hefei and Changzhou branches.
Yinma provides a one-year free warranty and lifetime service for the whole machine or project of the inkjet printer, traceability system and other products .
1. For products that implement the domestic market price (FOB), Yinma Company is only responsible for domestic delivery, installation and commissioning, training, etc. For the inkjet coding equipment, laser equipment, etc. used abroad, Yinma will provide telephone guidance. Accessories can enjoy domestic prices, but the freight is self-care.
2. For the direct-exporting coding equipment, yinma services shall be implemented in accordance with the terms of service agreed by both parties.
3. If foreign customers need, Yinma can provide overseas services. The fee is: USD 150/day + transportation fee + travel expenses.
4. The accessories required for equipment maintenance shall be charged according to domestic maintenance standards.
Contact Person: Haozhou Zhang