Jet printing integrity, Mark safety----Win the future
|Place of Origin:||Shanghai|
|Minimum Order Quantity:||1 set|
|Packaging Details:||fumigated wooden packaging|
|Delivery Time:||14 work days|
|Payment Terms:||L/C, T/T|
|Supply Ability:||10 units per month|
|Type:||3 In 1 Filling Machine||Washing Bottle Water Pressure:||0.5～0.6Mpa|
|Contactor, Breaker:||Siemens||Cylinder, Magnetic Valve:||AirTAc|
Bottle 3 In 1 Filling Machine / Tea And Milk Liquid Filling And Capping Machine
This machine is our new product best on Italian filling technique and our many years of production experience. Three functions washing, filling, capping are composed one body, reasonable design, beautiful outsider status, easy for operation and maintenance, full automatic. It is used for filling juice, tea and milk drinking.
(1)This equipment adopts hanging bottle conveyor method, it is reliable. It does just need to change a small number of spare parts for changing different bottles.
(2)The filling part adopts Italian technique and low gravity type vacuum filling principle. Second open valve technique is adopted to ensure full filling process level.
(3)Spring type bottle clip, empty bottle automatic over 180 degrees by rail, to washing the bottle inside.
(4)Capping parts adopt Italy advanced technology, magnetic torque capping head. And the height of the cap part can be adjustable, it can be suitable for capping different height of the bottles.
(5)The whole machine adopts Human-machine interface, PCL controller, full automatic control technology with Frequency-converter stepless speed regulating. The equipment will stop when the temperature is low, and it does automatic control the feeding and back flow. Without bottle without cap, When no bottles available, the machine will be in waiting state,and no caps will be applied. When no caps available, or the bottles are jammed, the machine will stop automatically.
(6)The whole machine equips the lubricating oil system, controlled by PLC.
Power of the equipment:
Spare part list
|Bottle gripper||Guide bar||Oil-cast nylon||5|
|Filling valve||Sealing gasket for the mouth of bottle||Edible rubber||40||Ф38×Ф18×10|
|Sealing gasket for the mouth of bottle||Edible rubber||40||Ф42×Ф23.5×4|
|Screw capping||Steel ball||1cr18Ni9Ti||45||Φ5|
1. Pre-sale services:
Free proofing and testing for your product;
Design and select products according to clients’ requirements;
Train technical personnel for clients
2. Services during the sale:
Pre-check and accept products ahead of delivery;
Help clients to draft solving plans;
3. After-sale services:
Provide considerate services to every clients’ worries;
Assist clients to prepare for the first construction scheme;
Install and debug the equipment;
Examine the equipment;
Take initiative to eliminate the troubles rapidly;
Provide technical exchanging.
Contact Person: Cathy